Dbx 1261M Digital Audio Zone Processor
• Fixed I/O, pre-configured architecture for easy setup. • Configurable insert processing for customized audio. • Link bus for audio channel duplication to another device.
This amazing processor offers 12 inputs and 6 outputs. It has 6 balanced mic/line inputs, 4 mono-summed unbalanced RCA inputs, and an S/PDIF input. You can adjust microphone gain per channel. With its pre-configured architecture, input processing, central matrix, and output processing, it's a breeze to use. The two input and one output insert positions let you configure channel-specific processing. And the AutoWarmth function ensures great sound even at low signal levels.
Control is a snap with Ethernet, serial, or third-party systems. The front panel has status LEDs and an RS-232 port. The Configuration Wizard in ZonePRO Designer guides you through setup.
Features: - 12 Inputs/6 Outputs
- Configurable Insert Processing
- Link Bus for Duplication
Specifications: - Input: 12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input
- Input Type: Euroblock (Mic/Line), RCA (Source)
- Input Impedance: Euroblock: >50kOhm Balanced, >25kOhm Unbalanced, RF Filtered; RCA: >25kOhm Unbalanced, RF Filtered
- Max Input: +20dBu Mic/Line, +12dBu RCA
- CMRR: > 40dB, typically >55db @ 1kHz
- Mic Preamp gain: 30 to 60dB
- Mic Preamp Equivalent Input Noise (EIN): < -118dBu, 22Hz-22kHz, 150Ohm Source Impedance
- Mic Preamp Phantom Power: 15V
- Output: 6 Total
- Output Type: Electronically Balanced, RF Filtered Euroblock
- Output Impedance: 120Ohm Balanced, 60Ohm Unbalanced
- Max Output: +20dBu
- A/D Converter: dbx Type IV Conversion System
- A/D Dynamic Range: (line) >113dB, A-weighted, >110dB unweighted
- Type IV Dynamic Range: >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW
- Sample Rate: 48kHz
- D/A Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW
- Dynamic Range: >110dB A-weighted, >107dB unweighted, 22kHz BW
- THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB gain
- Frequency Response: 20Hz – 20kHz, +/- 0.5dB
- Interchannel Crosstalk: >80dB typical
- Propagation Delay: 0.8 msec
- Operating Voltage: 100-240 VAC, 50/60Hz
- Power Consumption: 27 W
- BTU: <92.13
- Unit Weight: 6.2 lbs/2.81 kg
- Dimensions: 1.75' (1U) x 19' x 7.75' (45mm x 483mm x 197mm)
- Safety Agency Certifications: UL 60065, IEC 60065, E 60065, EN 55013
The Dbx 1261M Digital Audio Zone Processor is perfect for professional audio setups. It's ideal for installers, integrators, and audio engineers. With 12 inputs and 6 outputs, it can handle various audio sources. It has a compact size of 1.75' (1U) x 19' x 7.75' (45mm x 483mm x 197mm) and weighs 6.2 lbs/2.81 kg, making it easy to install. The processor offers fixed I/O, pre-configured architecture, and configurable insert processing for customized audio. It also has a link bus for audio channel duplication to another device. Control is a snap with Ethernet, serial, or third-party systems. The front panel has status LEDs and an RS-232 port. The Configuration Wizard in ZonePRO Designer guides you through setup. Get great sound and easy control with the Dbx 1261M.
