Shure Axient AD4Q-DC Four-Channel Digital Wireless Receiver - B Band

Shure Axient AD4Q-DC Four-Channel Digital Wireless Receiver - B Band

Revolutionize your audio setup with the Shure Axient AD4Q-DC! This four-channel digital wireless receiver offers groundbreaking performance and unparalleled flexibility. • Wide Tuning: Enjoy a wide tuning range up to 184MHz for seamless signal reception. • Low Latency: Experience audio with minimal delay for a truly immersive experience. • Quadversity Mode: Benefit from extended antenna coverage and improved RF signal-to-noise. Compatible with all Axient Digital transmitters, this receiver is a must-have for professionals in the audio industry.

Features:

• DC Power Module supports backup power sources and remote operation
• True digital naversity reception per channel for drop-out resistance
• Networked control with Wireless Workbench and ShurePlus Channels app
• Front panel headphone jack enables Dante Cue and Dante Browse monitoring
• Configurable Ethernet switch for redundant Dante digital output
• Switchable XLR/AES3 outputs
• Channel Quality meter displays RF signal-to-noise
• Locking AC connectors
• Optional DC module available to support redundant power

Specifications:

• Dimensions (H ¡Á W ¡Á D):
  • 1.7 ¡Á 19.0 ¡Á 13.1 in
  • (44 ¡Á 483 ¡Á 333 mm)
• Weight: 10.6 lb (4.8 kg) without antennas
• Housing: Steel; extruded aluminum
• Power Requirements:
  • 100 to 240 VAC, 50–60 Hz
  • 0.68 A max
• Thermal Dissipation:
  • Maximum: 23 W (78 BTU/hr)
  • Idle: 15 W (6)
• DC Input Voltage Range: 10.9–14.8 V DC
• Maximum DC Input Current: 4.0 A
• Protection Modes: Overvoltage, Undervoltage, Reverse Polarity
• 4-Pin XLR:
  • Pin 1: Negative; Pin 2: No Connection
  • Pin 3: No Connection; Pin 4: Positive
• Audio Output:
  • Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
  • Configuration:
    • 1/4' (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
    • XLR: Transformer-Coupled Balanced (1=ground, 2=audio +, 3=audio –)
  • Impedance (Typical, XLR Line Out) 100 Ω
  • Full Scale Output (200 kΩ load):
    • 1/4' (6.35 mm): +8 dBV
    • XLR (LINE setting): +18 dBV
    • XLR (MIC setting): –12 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection: Yes
• Networking:
  • Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 100 m (328 ft)
• Cascade Output:
  • Connector Type: BNC
  • Configuration: Unbalanced, passive
  • Impedance: 50 Ω
  • Insertion Loss: 0 dB, typical
• RF Input:
  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ω
  • Bias Voltage: 12-13.5 VDC, 150 mA maximum, per antenna, switchable on/off
  • RF Carrier Frequency Range: B: 606 to 810 MHz MHz

The Shure Axient AD4Q-DC Four-Channel Digital Wireless Receiver - B Band is designed for audio professionals who need reliable and high-quality wireless reception. It's perfect for live events, broadcasts, and installations. With dimensions of 1.7 x 19.0 x 13.1 inches (44 x 483 x 333 mm) and a weight of 10.6 lb (4.8 kg) without antennas, it's compact and easy to install. The receiver offers features like wide tuning, low latency, and Quadversity mode for excellent performance in challenging RF environments.