RCF CR 16-ND Control Rack - The Ultimate Audio Control Solution
RCF CR 16-ND Control Rack - 10 RU
• Effortlessly manage your HDL 50-A line array system with this 10 Unit flight case.
• Enjoy seamless audio signal routing and processing with the included DX 1616 matrix processor.
• Take control with the CP 16 control panel and experience high-quality audio like never before.
RDNet Control 8
• Real-time monitor and control system for up to 256 devices.
• Ensure minimal refresh time for all system data performance metrics.
• Connect via USB or Ethernet and manage your devices with ease.
DX 1616 Matrix Audio Processor
• Manage your DX 1616 Matrix Sound Processor with powerful software.
• Configure pre-amp settings, select source types, and design input groups.
• Enjoy high-quality audio processing with a 16x16 router.
Features:
- RCF CR 16-ND Control Rack - 10 RU:
- 10 RU flight case on shock mounts
- DX 1616 matrix audio processor
- CONTROL 8 master unit
- CP16 control panel
- 16 analog audio inputs, 16 analog audio outputs
- 8 AES/EBU inputs - 8 AES/EBU outputs
- Dante input
- 4 x LK 25 multicore audio/RDNet outputs
- RDNet Control 8:
- Ethernet (remote control) and USB (direct control) PC connection to RDNet
- Control up to 8 SUB-NETS of up to 32 Slave Devices
- All devices are cyclically scanned (¡°POLLING”) 10 times a second
- Auto detect device placement
- Controlling slave devices status and functions
- Monitoring and displaying faults and warnings sent from slave devices
- Storing subnet user filters configuration in a removable memory card
- DX 1616 Matrix Audio Processor:
- Hybrid architecture DSP
- 48 kHz sampling, 40-bit floating point engine
- 16 x 16 I/O matrix
- Dante-enabled network audio transport
- 8 AES/EBU inputs - 8 AES/EBU outputs
- Ethernet connectivity and control
- Maximum latency 3 ms
- Easy-to-use software GUI
Specifications:
- RCF CR 16-ND Control Rack - 10 RU:
- Rack Unit: 10
- Analog Audio Inputs: 16
- Analog Audio Outputs: 16
- AES/EBU Inputs/Outputs: 8
- Dante Input: Yes
- Master Unit: 8
- RDNet: Yes
- Weight: 57 kg / 125.66 lbs
- RDNet Control 8:
- Number of Subnets: 8
- Connectors: RJ 45, XLR
- Max Number of Devices (for each subnet): 32
- Configuration: PC software
- PC Connection: USB (Type B), Ethernet
- Data Storage: SD card (max. 4 GB)
- Operating Voltage: 90-240 V~ 50/60Hz
- Power Consumption (W): 15
- RDNet: Yes
- Cabinet/Case Material: Metal
- Color: Black
- Rack Mounting: 19', 1U
- Height: 44 mm / 1.73 inches
- Width: 482 mm / 18.98 inches
- Depth: 182 mm / 7.17 inches
- Weight: 2.71 kg / 5.97 lbs
- DX 1616 Matrix Audio Processor:
- Audio Performance:
- Frequency Response (-3dB): 20 Hz ¡ 22 kHz
- Crosstalk (on the whole bandwidth): <-100 dB
- Distortion (THD+N) @ 1 kHz nominal power: <0.001 %
- Dynamic Range: >110 dB
- Common Mode Rejection Ratio (50 Hz to 10 kHz): >100 dB
- Digital Audio Performance:
- Resolution: 40-bit
- Sampling Rate: 48 kHz
- A/D - D/A Converters: 24-bit
- Propagation Delay: 3 ms
- Input Section:
- Total Number of Inputs: 17
- Balanced: 17
- Mono: 16
- Mic+Line Inputs: 16
- Mic+Line Connectors: Euroblock
- Mic+Line Phantom: 21 V DC - 44 V DC
- Digital Inputs: 1
- Digital Connectors: RJ45
- Digital Type: DANTE
- Output Section:
- Signal Output Number: 16
- Signal Output Connectors: Euroblock
- Processing:
- DSP: Yes
- EQ Filters: Yes
- Delay: Yes
- Tone Controls: Yes
- High-pass Filter: 20 Hz ¡ 20 kHz
- Crossover: 20 ¡ 20 kHz
- Controls:
- Configuration: PC Software
- Number of Programs/Presets: 70
- Protections:
- Cooling: Convection/Forced
- Fuses: Yes
- Power Requirement:
- Operating Voltage: 90-240 V~ 50/60Hz
- Power Consumption: 20 W
- Standard Compliance:
- Safety Agency: CE compliant
- Physical Specifications:
- Cabinet/Case Material: Metal
- Color: Black
- Rack Mounting: 19', 1U
- Size
- Height: 44 mm / 1.73 inches
- Width: 483 mm / 19.02 inches
- Depth: 229 mm / 9.02 inches
- Weight: 3.31 kg / 7.3 lbs
The RCF CR 16-ND Control Rack is a 10 RU flight case designed for audio professionals. It includes a DX 1616 matrix audio processor, CONTROL 8 master unit, and CP16 control panel. With 16 analog audio inputs, 16 analog audio outputs, 8 AES/EBU inputs/outputs, and Dante input, it's perfect for managing your HDL 50-A line array system. The rack unit weighs 57 kg / 125.66 lbs and is built on shock mounts for durability. The RDNet Control 8 allows you to manage up to 256 devices with ease, while the DX 1616 Matrix Audio Processor provides seamless audio signal routing and processing. Ideal for live events, concerts, and installations, this control rack is a must-have for any audio setup.
