Radial SAT2 - Your Ultimate Stereo Audio Control Solution
Take control of your audio with ease!
• Crystal-clear level control: Whether you're using high-gain mic preamps or powering speakers, the SAT-2 ensures a transparent audio experience.
• Ultra-versatile: Use it as a monitor controller or to attenuate signals before they reach your audio interface.
• Effortless operation: With features like mute, mono, and dim switches, managing your audio has never been simpler.
Radial SAT2 is a game-changer for audio enthusiasts. Ideal for recording studios, home setups, and live sound applications.
Keywords: stereo audio, attenuator, monitor controller
Features:
- Level control for a pair of powered speakers
- Attenuates hot signal levels to prevent clipping
- Passive audio circuit, no power required
- Transparent operation without signal coloration
- Mono
Sums the left and right outputs to mono. - Mute
Silences the outputs of the SAT-2. - Master
Sets the overall output level. Passes signal at unity gain (no attenuation) when turned fully clockwise. - DIM on
Used to reduce output levels temporarily without affecting the setting on the trim control. - DIM Level
Sets the amount of signal attenuation applied when Dim On is engaged - Outputs
XLR outputs for a pair of powered speakers or the inputs of a recording interface. - Inputs
TRS ' or XLR inputs are available for the left and right channels. - Warranty: Radial 3-year, transferable
Specifications:
- Audio circuit type: Passive audio signal path
- Number of channels: 2
- Frequency response: 20Hz to 20kHz
- Dynamic range:>141dB
- Gain:0dB
- Total harmonic distortion: >0.0005% @ 0dBu
- Intermodulation Distortion: >0.001% @ 0dBu
- Phase Deviation: 0° @ 20Hz, 0° @ 1kHz, +2° @10kHz
- Input Impedance: 8 k
- Output Impedance: 1.8 k
- Common Mode Rejection Ratio: >80dB
- Noise:-115dBu
- Maximum Input:>+ 26dBu
- Features
- Mono Sum, Level Control
- Input Connectors:XLR, 1/4'
- Output Connectors:XLR
- General
- Construction: 14-gauge steel chassis and outer shell
- Size (L x W x D): 5' x 3.25' x 2' (12.7 x 8.3 x 5cm)
- Weight: 1.5lb (0.68kg)
- Shipping size (L x W x D):6.4' x 4.25' x 3' (16.3 x 10.8 x 7.6cm)
- Shipping weight: 1.8lb (0.8kg)
- Power:Passive, no power required
- Conditions: For use in dry locations only between 5°C and 40°C
The Radial SAT2 is perfect for audio engineers, musicians, and home studio enthusiasts. Use it as a monitor controller between your audio interface and powered speakers, or to attenuate hot mic preamp or compressor outputs. With its 5' x 3.25' x 2' (12.7 x 8.3 x 5cm) size and 1.5lb (0.68kg) weight, it's easy to install and use. Its passive design means no power required, making it convenient for various setups.
