Radial DiNet Dan-TX: The Ultimate Dante Audio Transmitter
Connect your instruments, laptops, tablets, or any line level source to a Dante Network with ease using the Radial DAN-TX! This stereo direct box is a game-changer for professional audio, making it simple to put almost any analog audio source onto the Dante network without the need for a large interface or mixer.
• Connect Any Source: Equipped with RCA and 3.5mm inputs, the DAN-TX accepts both balanced (TRS) and unbalanced (TS) connectors, allowing you to connect any device with ease. Use the Instrument switch to convert one of the jacks to a 'Thru' for local monitoring when connecting a single-channel instrument.
• Exceptional Audio Quality: With 24bit/96kHz analog to digital converters, the DAN-TX delivers exceptional audio quality. Control levels locally via an input trim pot that offers +/-10dB of control, with an additional -20dB pad available when needed.
• Easy Dante Network Connection: Connect to the Dante network in seconds using standard Cat5e or Cat6 cable. The DAN-TX accepts Power over Ethernet (PoE), but a power adapter is included for use when PoE is not available. Once connected, the DAN-TX will appear as a 2-channel transmit device in the Dante Controller software and on other enabled devices on the network.
Features:
- The first Dante enabled direct box
- ', RCA and 3.5mm input jacks
- Connect instruments or line level sources
- 24bit/96kHz analog to digital conversion
Specifications:
- Audio Circuit Type:High current balanced active input device
- Number of Channels:2
- Sample Rate:44.1kHz, 48kHz, 88.2kHz, and 96kHz
- Bit Depth:24 bit
- Frequency Response:20Hz - 20kHz
- Idle Channel Noise:-108dB
- Dynamic Range:>103dB
- Channel Separation:>85dB
- Equivalent Input Noise:-98dB
- Total Harmonic Distortion + Noise:0.008% @ -6dBfs
- IMD:0.0017% -10dBfs
- Unbalanced Input Impedence - Instrument Mode240k
- Balanced Input Impedence - Line Mode40k
- Unbalanced Input Impedence - Line Mode20k
- Power Consumption:1.25W
- Input Connections:2x ' TS/TRS, 3.5mm TRS, 2x RCA
- Output Connectors:RJ45 Ethernet
- LED Indicators:SYNC, SYS, +15V and PoE
- Pad:-18dB
- HPF:-12dB/octave @ 80Hz
- General
- Power15VDC 400mA (included) or PoE
- Power over Ethernet (PoE):Class 1 IEEE 802.3af
- Construction:14-gauge steel
- Finish:Durable Powder Coat
- Size (L x W x H):5' x 3.31' x 1.88' (12.7cm x 8.4cm x 4.8cm)
- Weight:1.45lb (0.66kg)
- Shipping Size (L x W x H):11.75' x 4.75' x 3' (29.8cm x 12.1cm x 7.6cm)
- Shipping Weight:2.1lb (0.95kg)
- FCC Approval:Meets FCC Part 15B Class A requirements for Professional equipment
- Conditions:For indoor use at temperatures between +5°C and +40°C
- Warranty:Radial 3-year, transferable
The Radial DiNet Dan-TX is a must-have for anyone looking to connect their analog audio sources to a Dante Network. Whether you're a musician, recording engineer, or broadcaster, this stereo direct box makes it easy to get your audio onto the network without the need for a large interface or mixer. With its RCA and 3.5mm inputs, you can connect any device, including instruments, laptops, and tablets. The DAN-TX features 24bit/96kHz analog to digital converters for exceptional audio quality, and it accepts both balanced and unbalanced connectors. Control levels locally via an input trim pot, and use the additional -20dB pad when needed. Connect to the Dante network in seconds using standard Cat5e or Cat6 cable, and the DAN-TX accepts Power over Ethernet (PoE) for easy installation. The unit is housed in a durable powder-coated 14-gauge steel enclosure, and it measures 5' x 3.31' x 1.88' (12.7cm x 8.4cm x 4.8cm) with a weight of 1.45lb (0.66kg). It's FCC approved and suitable for indoor use at temperatures between +5°C and +40°C. The Radial DiNet Dan-TX comes with a 3-year transferable warranty.
