Radial Cherry Picker Passive 1x4 Selector - The Ultimate Studio Audio Switcher
Studio preamp selector and switcher
Instantly audition a single source through multiple devices in your studio. No more cable swapping!
Make quick decisions with confidence
Compare up to four preamps, compressors, or effects units in seconds. The Cherry Picker gives you the freedom to explore endless sonic possibilities.
Simple and reliable
A passive 'straight wire' signal path means zero phase shift and distortion. Built-in 48V phantom power for condenser mics.
Highlights:
• Effortlessly compare multiple audio devices with a single source
• Passive 'straight wire' signal path for pristine audio quality
• Built-in 48V phantom power for condenser mics
Technical Specs:
• Audio circuit type: Passive signal path with active relay switching
• Frequency response: 10Hz to 40kHz
• Dynamic range: >115dBu
• Gain: 0.0dB – Unity gain device
• Total harmonic distortion: 0.0003%
• Intermodulation Distortion: 0.001%
• Phase Deviation: <0.001 degrees at all frequencies
• Input Impedance: 10k Ohms
• Common Mode Rejection Ratio: -97dB @55Hz
• Equivalent Input Noise: -115dB
• Maximum Input: +26dBu
• Maximum Output: +26dBu
• Ground lift, Phantom Power
• Input Connectors: Balanced XLR female
• Output Connectors: 4 x XLR male
• Construction: 14 gauge steel chassis & outer shell
• Size (L x W x D): 4.5' x 2' x 6' (121 x 64 x 147mm)
• Weight: 2.8 lb (1.3kg)
• Shipping size (L x W x D): 4.75' x 2.5' x 10.75' (121 x 64 x 273mm)
• Shipping weight: 3.05 lb ( 1.4kg)
• Power: +15V DC/400mA power supply included
• Conditions: For use in dry locations only between 5°C and 40°C
• Warranty: Radial 3-year, transferable
The Radial Cherry Picker Passive 1x4 Selector is a must-have for any recording studio or audio engineer. Use it to quickly compare different preamps, compressors, or effects units with a single microphone or line level source. This selector features a passive 'straight wire' signal path for pristine audio quality and zero phase shift. It also has built-in 48V phantom power for condenser mics. The selector is easy to use, with radio-style selector switches and front panel indicators to show you which output is active. It's compact and lightweight, with a 14 gauge steel chassis and outer shell. The size is 4.5' x 2' x 6' (121 x 64 x 147mm) and it weighs 2.8 lb (1.3kg). The shipping size is 4.75' x 2.5' x 10.75' (121 x 64 x 273mm) and it weighs 3.05 lb (1.4kg). It comes with a +15V DC/400mA power supply and is designed for use in dry locations between 5°C and 40°C. The warranty is 3 years and transferable.
