Q-SYS DCA2422 Digital Cinema Audio Amplifier - Immerse in Crystal Clear Sound
Get ready to experience cinema sound like never before with our DCA Series Digital Cinema Amplifiers! These amplifiers are a game-changer for anyone looking to elevate their audio setup. Whether you're a home theater enthusiast or a professional installer, the DCA2422 is designed to deliver exceptional sound quality and performance.
• Crystal-clear sound that will make you feel like you're in the middle of the action
• PowerLight switching technology for ultra-powerful bass and superior highs
• Versatile features and input/output connectors to meet all your installation needs
The PowerLight technology is what sets these amplifiers apart. It charges the supply rails 230,000 times per second via an ultra-low impedance circuit, ensuring a crisp and clear audio signal. Say goodbye to wasted heat and hello to boosted reliability.
The DCA Series amplifiers also come with selectable clip limiters, subsonic filters, and multiple operational modes. With XLR, 1/4” TRS, and detachable terminal block input connectors, and outputs on Neutrik Speakon and safety-shrouded barrier strips, you'll have everything you need for a seamless installation.
With five models to choose from, there's a DCA amplifier for every application. The DCA1222 is great for surround applications, while the DCA3422 is perfect for powering subwoofer systems.
Features:
- Active Inrush Limiting - no more blown circuit breakers at turn-on
- Speaker and monitor panel outputs for added flexibility
- Exclusive PowerLight power supply for amazing bass
- Hum-free noise floor and ultra-low distortion for a pure audio experience
- Only 3.5 inches high - easy to install in any setup
- DataPort interface for seamless integration with DCP Digital Cinema Processors and DCM Digital Cinema Monitors
- Patented Output Averaging short circuit protection for peace of mind
- 14-inch deep - works with standard depth racks for cost-effective installation
- Only 21 pounds - easy to handle and transport
- Gain control security cover to prevent tampering and misadjustment
- Variable-speed fan cooling and back-to-front air flow for optimal performance
- Neutrik Speakon and safety-shrouded barrier strip output connectors for a secure connection
- LED indicators for easy monitoring of metering, status, and operating mode
Specifications:
- 8Ω, 20 Hz–20 kHz, 0.03% THD: 425 W
- 4Ω, 20 Hz–20 kHz 0.05% THD: 700 W
- EIA: 1 kHz, 1% THD @:
- 8Ω: 475 W
- 4Ω: 825 W
- 2Ω: 1200 W
- Bridged Mono Mode:
- 16Ω, 20 Hz–20 kHz, 0.1% THD: 850 W
- 8Ω, 20 Hz–20 kHz, 0.1% THD: 1500 W
- 4Ω, 1 kHz, 1% THD: 2400 W
- Signal to Noise 20 Hz–20 kHz, unweighted: > 108 dB
- Input Sensitivity full rated power @ 8 ohms: 1.5 V rms +5.5 dBu
- Input Sensitivity full rated power @ 4 ohms: 1.3 V rms +4.6 dBu
- Output Circuitry Class Type: 2-Step H
- Distortion (SMPTE-IM): < 0.02%
- Distortion (Typical)
- 20 Hz–20 kHz: 10 dB below rated power: Less than 0.01% THD @ 8 and 4 ohms
- 1.0 kHz and below: full rated power: Less than 0.01% THD @ 8 and 4 ohms
- Frequency Response (LF filter switched off)
- 20 Hz–20 kHz, ± 0.2 dB
- 8 Hz–50 kHz, + 0/-3 dB
- Damping Factor (1 kHz and below): Greater than 500
- Input Impedance
- 10 kΩ unbalanced
- 20 kΩ balanced
- Input Clipping: 10 V rms (+22 dBu)
- Cooling: Variable-speed fan, rear-to-front air flow
- Connectors, Each Channel
- Input: 1/4' TRS, 3-pin XLR & 3-pin detachable terminal block
- Output: Neutrik Speakon and safety-shrouded barrier strip, including Monitor output
- DataPort: One HD15
- Voltage Gain at 8 ohms: 40x (32 dB)
- Controls
- Front: AC switch, Ch. 1 and Ch. 2 recessed gain knobs
- Rear: DIP switch (Clip Limiter on/off, each channel; LF Filter on/off, each channel; LF Filter Freq select 30 or 50 Hz, each channel; Inputs Parallel or Stereo; Bridge Mode)
- Indicators (1 each per channel)
- CLIP/PROT: Red LED
- LEVEL -10 dB: Green LED
- LEVEL -20 dB: Green LED
- SIGNAL -35 dB: Green LED
- BRIDGED: Yellow LED
- PARALLEL INPUTS: Yellow LED
- POWER: Green LED
- Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and RF protection; stable into reactive or mismatched loads
- Load Protection: On/off muting, DC-fault power supply shutdown
- Dimensions (HWD)
- Inches: 3.5 x 19 x 14
- Millimeters: 89 x 483 x 356
- Weight: 21 lb (9.5 kg) net
The Q-SYS DCA2422 Digital Cinema Audio Amplifier is perfect for home theater enthusiasts and professional installers. With its compact size (3.5 x 19 x 14 inches, 21 pounds), it's easy to install in any setup. It delivers crystal-clear sound, thanks to features like PowerLight switching technology. Whether you're creating a surround sound system or powering subwoofers, this amplifier has the power and versatility you need. The multiple operational modes and various input/output connectors make it suitable for a wide range of applications.
