Meyer Sound UPM-2P Self-Powered Compact Loudspeaker
The Meyer Sound UPM-2P is an incredibly compact and self-powered professional sound reinforcement loudspeaker system. It's perfect for those seeking a small yet powerful solution. With high sound pressure levels, low distortion, and great directional control, it's a top choice.
Features:
- Exceptional fidelity and power in a super-compact design
- Narrow, symmetrical pattern for precise coverage
- Unique crossover design for consistent mid-range
- Metal dome driver for smooth high-frequency
Specifications:
- Acoustical
- Operating Frequency Range: 80 Hz - 20 kHz
- Frequency Response: 85 Hz - 19 kHz ±4 dB
- Phase Response: 300 Hz - 18 kHz ±60°
- Maximum Peak SPL: 123 dB
- Dynamic Range: >110 dB
- Coverage
- Horizontal: 45°
- Vertical: 45°
- Crossover
- Transducers
- Low Frequency:
- Two 5' cone drivers
- Nominal impedance: 8 Ω
- Voice coil size: 1'
- Power-handling capability: 200 W (AES)
- High Frequency:
- One 1' metal dome tweeter
- Nominal impedance: 8 Ω
- Voice coil size: 1'
- Diaphragm size: 1'
- Power-handling capability: 20 W (AES)
- Audio Input
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: Female XLR input with male XLR loop output
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal - (optional polarity reversal switch)
- Case: Earth ground and chassis
- DC Blocking: Differential DC blocking up to maximum common mode voltage
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
- TIM Filter: <80 kHz, integral to signal processing
- Nominal Input Sensitivity: 0 dBV (1 V rms, 1.4 V pk) continuous average is typically the onset of limiting for pink noise and music
- Input Level: Audio source must be capable of producing a minimum of +20 dBV (10 V rms, 14 V pk) into 600 Ω to produce maximum peak SPL over the operating bandwidth of the loudspeaker
- Amplifiers
- Type: Complementary MOSFET output stages (class AB/bridged)
- Output Power: 350 W total
- THD, IM, TIM: <.02 %
- Load Capacity: 4 Ω low channel, 8 Ω high channel
- Cooling: Convection
- AC Power
- Connector: PowerCon with looping output
- Voltage Selection: External 115/230 V AC switch (100 V AC version available)
- Operating Voltage Ranges: 105 V AC - 130 V AC (115 V AC); 210 V AC - 260 V AC (230 V AC)
- Current Draw:
- Idle Current: 0.13 A rms (115 V AC); 0.065 A rms (230 V AC); 0.15 A rms (100 V AC)
- Max Long-Term Continuous Current (>10 sec): 1 A rms (115 V AC); 0.5 A rms (230 V AC); 1.2 A rms (100 V AC)
- Burst Current (<1 sec): 1.3 A rms (115 V AC); 0.65 A rms (230 V AC); 1.5 A rms (100 V AC)
- Ultimate Short-Term Peak Current Draw: 2.9 A pk (115 V AC); 2 A pk (230 V AC); 3.3 A pk (100 V AC)
- Inrush Current: 18 A pk (115 V AC); 12 A pk (230 V AC); 15 A pk (100 V AC)
- RMS Network (Optional)
- Equipped for two-conductor twisted-pair network, reporting all amplifier operating parameters to system operator's host computer.
- Physical
- Dimensions:
- 6.85' w x 18.00' h x 7.70' d
- (174 mm x 457 mm x 196 mm)
- Weight: 21 lbs (9.53 kg)
- Enclosure: Premium birch plywood
- Finish: Black textured
- Protective Grille: Powder-coated hex-stamped steel, foam covering
- Rigging: Three 3/8'-16 or metric M10 nut plates
The Meyer Sound UPM-2P Self-Powered Compact Loudspeaker is great for small to medium-sized venues like clubs, cafes, and small theaters. Ideal for event organizers, venue owners, and sound engineers who want high-quality sound in a compact package. With dimensions of 6.85' w x 18.00' h x 7.70' d (174 mm x 457 mm x 196 mm) and a weight of 21 lbs (9.53 kg), it's easy to set up and move around.
