Meyer Sound LINA Ultra-Compact Line Array Loudspeaker In White
The LINA is a game-changer! It's perfect for venues like small theaters, theme parks, and houses of worship. • Exceptional High-Frequency Performance: Enjoy outstanding high frequency headroom and phase coherence. • Compact and Lightweight: Ideal for low-profile, high-power setups. • Easy Integration: Works great with other Meyer Sound systems.
Features:
- Small footprint for small venues and fill applications
- Great power-to-size ratio
- Exceptional linearity and low distortion
- Self-powered for easy setup
- Flexible rigging options
- Easy integration with other Meyer Sound products
Specifications:
- Acoustical:
- Operating Frequency Range: 65 Hz – 18 kHz
- Phase Response: 100 Hz – 18 kHz ±45°
- Maximum SPL: 138 dB
- Linear Peak SPL: 132 dB with 19 dB crest factor (M-noise), 128 dB (Pink noise), 130 dB (B-noise)
- Coverage:
- Horizontal Coverage: 100°
- Vertical Coverage: Varies, depending on array length and configuration
- Transducers:
- Low Frequency: Two 6.5-inch long-excursion cone drivers; 4 Ω nominal impedance
- High Frequency: One 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM manifold; 8 Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: XLR 3-pin female input with male loop output. Optional XLR 5-pin connector to accommodate both balanced audio and RMS signals.
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 220 k, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Pin 4: RMS
- Pin 5: RMS
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Amplifier:
- Type: 3-channel, Class-D
- Total Output Power: 1950 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Convection
- AC Power:
- Connectors: powerCON 20 input with loop output
- Automatic Voltage Selection: 90–265 V AC, 50–60 Hz
- Safety Agency Rated Operating Range: 100–240 V AC, 50–60 Hz
- Turn-on and Turn-off Points: Turn-on: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
- Current Draw:
- Idle Current: 0.25 A rms (115 V AC); 0.25 A rms (230 V AC); 0.29 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 2.3 A rms (115 V AC); 1.16 A rms (230 V AC); 2.8 A rms (100 V AC)
- Burst Current (<1 sec): 3.9 A rms (115 V AC), 1.7 A rms (230 V AC), 4.5 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 8.8 A peak (115 V AC), 4.0 A peak (230 V AC), 9.2 A peak (100 V AC)
- Inrush Current: < 20 A peak
- RMS Network: Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator's host computer.
- Physical:
- Dimensions: W: 20.27 in (515 mm) x H: 8.38 in (213 mm) x D: 15.32 in (389 mm)
- Weight: 43 lb (19.5 kg)
- Enclosure: Premium multi-ply birch, slightly textured white finish
- Protective Grille: Powder-coated, hex-stamped steel with acoustical white mesh
- Rigging: End frames with captive GuideALinks secured with 0.25 in x 0.53 in quick release pins that allow 0° to 11° splay angles. M6 attachment points for optional MYA-MINA/LINA mounting yoke and MUBMINA/LINA U-bracket
*Appearance of product may differ from image
The Meyer Sound LINA is an ultra-compact line array loudspeaker perfect for small theaters, theme parks, and houses of worship. It features a small footprint, great power-to-size ratio, and easy integration with other Meyer Sound products. With dimensions of 20.27 in (515 mm) wide, 8.38 in (213 mm) high, and 15.32 in (389 mm) deep, and weighing 43 lb (19.5 kg), it's easy to set up and use in a variety of venues.
