Meyer Sound Acheron Studio Screen Channel Loudspeaker for Cinema Applications with Yoke / 3-Pin XLR

Meyer Sound Acheron Studio Cinema Loudspeaker with Yoke and 3-Pin XLR

The Acheron Studio is a top-notch cinema loudspeaker. It features the same innovative horn technology (patent pending) as the Acheron 80. • Specifically designed for cinema use, it offers a smooth roll-off outside its well-behaved 80-degree horizontal by 50-degree vertical coverage pattern. • The horn is securely fixed inside the enclosure for precise acoustic crossover, phase response, and a consistent vertical pattern. • With a 580 Hz crossover point, it places most dialog in the horn, making it perfect for cinema.

Features:

• High peak power output with ultralow distortion
• Exceptional fidelity and extended high frequency performance
• Constant-Q horn yields uniform response throughout coverage area
• Extraordinarily flat amplitude and phase response for tonal accuracy
• Seamless integration with HMS-10 surround loudspeakers and X-800C subwoofer

Specifications:

• Acoustical:
  • Operating Frequency Range: 37 Hz – 18 kHz
  • Frequency Response: 38 Hz – 17 kHz ±4 dB
  • Phase Response: 700 Hz – 17 kHz ±30°
  • Maximum Peak SPL: 134 dB
  • Dynamic Range: >110 dB
• Coverage: 80° horizontal x 50° vertical
• Crossover: 580 Hz
• Transducers:
  • Low Frequency:
    • 15' low-frequency cone driver
    • Nominal impedance: 2 Ω
    • Voice coil size: 3'
    • Power handling capability: 400 W (AES)5
  • High Frequency:
    • 4' compression driver
    • Nominal impedance: 8 Ω
    • Voice coil size: 4'
    • Diaphragm size: 4'
    • Exit size: 1.5'
    • Power handling capability: 250 W (AES)
• Audio Input:
  • Type: Differential, electronically balanced
  • Maximum Common Mode Range: ±5 V DC, clamped to earth for voltage transient protection
  • Connectors: Female XLR input with male XLR loop output
  • Input Impedance: 10 kΩ differential between pins 2 and 3
  • Wiring:
    • Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequencies
    • Pin 2: Signal +
    • Pin 3: Signal -
    • Case: Earth ground and chassis
  • DC Blocking: Differential DC blocking up to the maximum common mode voltage
  • CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
  • RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
  • TIM Filter: Integral to signal processing (<80 kHz)
  • Nominal Input Sensitivity: 10 dBV (3.2 V rms) continuous is typically the onset of limiting for noise and music
  • Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
• Amplifier:
  • Type: Power handling capability: 250 W (AES)
  • Output Power: 700 W (1 x 550 W, 1 x 250 W)
  • Total Output: 1400 W peak
  • THD, IM, TIM: < 0.02%
  • Load: 2 Ω low channel; 8 Ω high channel
  • Cooling: Convection
• AC Power:
  • Connectors: PowerCon
  • Voltage Selection: Automatic, continuous range from 90 V AC to 265 V AC
  • Safety Agency Rated Operating Range: 100–240 V AC, 50/60 Hz
  • Turn-on and Turn-off Points: 90 V AC on, no turn-off, only fuse-protect above 265 V AC
  • Current Draw: Idle Current: 0.340 A rms (115 V AC); 0.227 A rms (230 V AC); 0.387 A rms (100 V AC)
  • Maximum Long-Term Continuous Current (>10 sec): 2.2 A rms (115 V AC); 1.1 A rms (230 V AC); 2.5 A rms (100 V AC)
  • Burst Current (<1 sec): 2.9 A rms (115 V AC); 1.5 A rms (230 V AC); 3.3 A rms (100 V AC)
  • Ultimate Short-Term Peak Current Draw: 7.4 A peak (115 V AC); 3.7 A peak (230 V AC); 8.5 A peak (100 V AC)
  • Inrush Current: 11 A peak (115 V AC); 18 A peak (230 V AC); 13 A peak (100 V AC)
• Physical:
  • Dimensions: 25.38' w x 30.78' h x 16.79' d (406 mm x 782 mm x 426 mm)
  • Weight: 113 lbs (51.26 kg)
  • Enclosure: Premium birch plywood
  • Finish: Low gloss, black textured
  • Rigging: Optional version of the Acheron Studio available with side attachment points and MYA-AST mounting yoke

This Meyer Sound Acheron Studio loudspeaker is perfect for cinema applications. It's ideal for audio professionals and movie enthusiasts looking to enhance their cinema sound experience. With dimensions of 25.38' w x 30.78' h x 16.79' d (406 mm x 782 mm x 426 mm) and weighing 113 lbs (51.26 kg), it offers great audio quality in a manageable size.