Meyer Sound Acheron Studio Screen Channel Loudspeaker for Cinema Applications with Remote Monitoring System, Yoke, and 3-Pin XLR
Get ready to be blown away by the Acheron Studio! This cinema loudspeaker is a game-changer. • Exceptional Horn Technology: The same horn technology (patent pending) as the Acheron 80, designed for cinema use. It has a soft roll-off outside its 80-degree horizontal by 50-degree vertical coverage pattern, ensuring an accurate acoustic crossover, phase response, and consistent vertical pattern. The 580 Hz crossover point places most dialog in the horn, perfect for cinema. • High-Quality Performance: Boasts high peak power output with ultralow distortion, exceptional fidelity, and extended high frequency performance. The constant-Q horn gives a uniform response throughout the coverage area, and has an extraordinarily flat amplitude and phase response for tonal accuracy. • Seamless Integration: Works seamlessly with HMS-10 surround loudspeakers and X-800C subwoofer. This cinema speaker is a must-have for any movie lover looking for an immersive audio experience. Ideal for home theaters and professional cinema setups.
Specifications:
- Acoustical:
- Operating Frequency Range: 37 Hz – 18 kHz
- Frequency Response: 38 Hz – 17 kHz ±4 dB
- Phase Response: 700 Hz – 17 kHz ±30°
- Maximum Peak SPL: 134 dB
- Dynamic Range: >110 dB
- Coverage: 80° horizontal x 50° vertical
- Crossover: 580 Hz
- Transducers:
- Low Frequency:
- 15' low-frequency cone driver
- Nominal impedance: 2 Ω
- Voice coil size: 3'
- Power handling capability: 400 W (AES)5
- High Frequency:
- 4' compression driver
- Nominal impedance: 8 Ω
- Voice coil size: 4'
- Diaphragm size: 4'
- Exit size: 1.5'
- Power handling capability: 250 W (AES)
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±5 V DC, clamped to earth for voltage transient protection
- Connectors: Female XLR input with male XLR loop output
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Case: Earth ground and chassis
- DC Blocking: Differential DC blocking up to the maximum common mode voltage
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
- TIM Filter: Integral to signal processing (<80 kHz)
- Nominal Input Sensitivity: 10 dBV (3.2 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
- Amplifier:
- Type: Power handling capability: 250 W (AES)
- Output Power: 700 W (1 x 550 W, 1 x 250 W)
- Total Output: 1400 W peak
- THD, IM, TIM: < 0.02%
- Load: 2 Ω low channel; 8 Ω high channel
- Cooling: Convection
- AC Power:
- Connectors: PowerCon
- Voltage Selection: Automatic, continuous range from 90 V AC to 265 V AC
- Safety Agency Rated Operating Range: 100–240 V AC, 50/60 Hz
- Turn-on and Turn-off Points: 90 V AC on, no turn-off, only fuse-protect above 265 V AC
- Current Draw: Idle Current: 0.340 A rms (115 V AC); 0.227 A rms (230 V AC); 0.387 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 2.2 A rms (115 V AC); 1.1 A rms (230 V AC); 2.5 A rms (100 V AC)
- Burst Current (<1 sec): 2.9 A rms (115 V AC); 1.5 A rms (230 V AC); 3.3 A rms (100 V AC)
- Ultimate Short-Term Peak Current Draw: 7.4 A peak (115 V AC); 3.7 A peak (230 V AC); 8.5 A peak (100 V AC)
- Inrush Current: 11 A peak (115 V AC); 18 A peak (230 V AC); 13 A peak (100 V AC)
- RMS Network(Optional): Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator's host computer
- Physical:
- Dimensions: 25.38' w x 30.78' h x 16.79' d (406 mm x 782 mm x 426 mm)
- Weight: 113 lbs (51.26 kg)
- Enclosure: Premium birch plywood
- Finish: Low gloss, black textured
- Rigging: Optional version of the Acheron Studio available with side attachment points and MYA-AST mounting yoke
The Meyer Sound Acheron Studio is designed for cinema use. Ideal for home theaters and professional cinema setups. It's a great choice for movie lovers who want an immersive audio experience. Dimensions are 25.38' w x 30.78' h x 16.79' d (406 mm x 782 mm x 426 mm) and it weighs 113 lbs (51.26 kg). The enclosure is made of premium birch plywood with a low gloss, black textured finish. There's also an optional version with side attachment points and MYA-AST mounting yoke for rigging.
