Clear-Com TBC5A RF Communication Battery Charger for 5 TLP1 Batteries

Clear-Com TBC5A RF 5-Battery Charger for TLP1

The Clear-Com TBC5A is a must-have for anyone needing to charge Tempest Lithium Polymer rechargeable batteries. It's a game-changer! • Charges up to 5 batteries simultaneously in just 2.5 hours. • Each bay charges its respective battery independently, without disturbing the others. MPN: GlobTek GS-2066(R)

Features:

• Simultaneous and separate charging for up to 5 Tempest Lithium-Polymer batteries
• Full charge in a mere 2.5 hours
• Battery Temperature monitoring
• Resistor-based battery identification
• LED status indicators
• Compact and portable

Specifications:

• Power Input:
  • Voltage Range: 90 - 264VAC
  • Frequency Range: 50 - 60Hz
  • Input Current: 0.8A max
  • Standby Power: 1W max
  • Input Fuse: 800mA per bay
  • Input Connector:
    • IEC60320
    • C8 (2-Pin)
• Output (per bay):
  • Voltage: 0 - 4.2V
  • Current: 0 - 1A
  • Power: 6W max
  • Voltage Tolerance: +1% max
  • Current Tolerance: +5% max
  • Leakage Current: < 1mA
  • Ripple & Noise: < 120mV (peak to peak)
  • Protection:
    • Short Circuit
    • Over Temp Shutdown
    • Reverse Polarity
• Environmental:
  • Cooling: Convection cooled
  • Temperature:
    • Operating: 32° – 104° F (0° – 40° C)
    • Non-Operating: -40° – 158° F (-40° – 70° C)
  • Altitude:
    • Operating: -382m - 2000m
    • Non-Operating: -382m - 4570m
  • Humidity: 5 - 95% r.H., non-condensing
• Dimensions:
  • Charger:
    • 6.9 in W x 2.91 in H x 1.57 in D
    • (176.5 mm x 74 mm x 40 mm)
  • Power Supply:
    • 4.7 in W x 2.2 in H x 1.3 in D
    • (120.5 mm x 56 mm x 32.3 mm)
• Weight:
  • Charger: 10.5 oz (0.3 kg)
  • Power Supply: 8.8 oz (0.25 kg)

The Clear-Com TBC5A RF 5-Battery Charger for TLP1 is perfect for professionals on the go who need to keep their Tempest Lithium Polymer rechargeable batteries charged. Whether you're in a studio, on a set, or at an event, this charger has you covered. It can charge up to 5 batteries at once in just 2.5 hours, and each bay charges independently. The charger is compact, measuring 6.9 in W x 2.91 in H x 1.57 in D (176.5 mm x 74 mm x 40 mm) and weighing 10.5 oz (0.3 kg). The power supply is 4.7 in W x 2.2 in H x 1.3 in D (120.5 mm x 56 mm x 32.3 mm) and weighs 8.8 oz (0.25 kg). It has a wide range of power input specifications, including a voltage range of 90 - 264VAC, a frequency range of 50 - 60Hz, and an input current of 0.8A max. Each bay has an output voltage of 0 - 4.2V, a current of 0 - 1A, and a power of 6W max, with voltage and current tolerances and protection features.